Home Page Product
View
  Low Swing & Low Noise
  M/C has long life
  Semi-Automatic with Separator
  Discharge by Air Cylinder
  Gap between Disc and Drum is Adjustable
   

 
 
The finishing tub consists of a stationary wall and spinning disc. The spinning disc, through centrifugal force, pushes media and parts toward the stationary wall with great force. The centrifugal force creates a unique toroidal action where the media and parts interact strongly which provides a strong finishing result for either deburring, surface refining, or polishing.

Even with the advantages that a rapid and strong finishing these kinds of machines provides, it does not have great popularity amongst customers. Because the debris, of media and parts, get stuck in the gap between the spinning disc and stationary wall, causing many problems. One problem was the fast wearing of the P.U. lining in the gap area, the replacement of the lining is a difficult job. Our innovations in the RF-SEMI-AUTO have solved all these problems.

1. Water is pumped through the gap to prevent debris from sticking. The water is then discharged through the over-flow hole located at the top of the wall, the debris and metal fillings are settled, and the water is recirculated into the chamber. During operation we found almost no gap problems and the wear rate of the lining was remarkably reduced.

2. The angle of the gap was specifically designed so debris would slide instead of sticking.

3. Even with the above improvements the lining in the gap will still wear out. But the gap can be adjusted to give long life without replacement.

4. Fully automated with its chamber on the lower place, convenient to check during operation.

5. Hydraulic cylinder is used to tilt the chamber and loading basket. No Air required, with no damage or impingement of parts.

6. Loading and unloading is done in the same position, convenient for operator.

 
DESCRIPTION / MODEL
RF - 100SA
RF - 200SA
RF - 300SA
RF - 400SA
Tub Capacity (?)
100
200
300
400
Finishing Capacity (?)
60
120
180
270
Tub Size
?605x380H 
?830x430H 
?890x515H  
?1,060x575H  
Machine Size
A
1,640
1,800
1,950
2,150
B
1,378
1,550
1,650
1,900
C
1,090
1,255
1,385
1,535
D
1,865
2,150
2,325
2,582
E
2,760
3,030
3,100
3,400
Motor
5HP
7.5HP
10HP
15HP
Weight
1,500 kg
2,700 kg
3,000 kg
4,000 kg
 
Top
 
Untitled Document
Copyright 2006 PRO DCM CO.,LTD @ All Rights reserved